Smart monitoring. Secure data.
blueplanet smartcloud
With the blueplanet smartcloud, KACO new energy has developed its own, new monitoring portal together with Siemens. The aim is to integrate state-of-the-art functions and offer the highest security standards when accessing the stored data.
You can already keep the following inverters under surveillance with the blueplanet smartcloud: blueplanet hybrid 6.0 NH3 - 12.0 NH3, blueplanet 3.0 NX3 - 20.0 NX3, blueplanet 25.0 NX3 - 33.0 NX3, blueplanet 50.0 NX3 / 60.0 NX3. A prerequisite for the blueplanet NX3 solar PV inverters is the simultaneous use of the new Connect-GEN2 communication unit. In this way, it is also possible to let inverters that are already in operation be monitored by the blueplanet smartcloud.
In a mixed system consisting of blueplanet NH3 and blueplanet NX3, you can integrate both the hybrid and solar PV inverters into the same monitoring system.
RED-compliant operation only with update and new communication unit
For RED-compliant operation of all NX series inverters, an update to the current “RED” software will be required from August 1.
In addition, the new Connect-GEN2 communication unit must be used.
Please note:
The blueplanet smartcloud can only be used in conjunction with the Connect-GEN2 stick.
Only when using the new communication unit and the updated software together is operation in compliance with the RED directive possible.
I vostri vantaggi in sintesi
- Installer and system owner accesses
- Seamless registration
- Power flow diagram
- Consumption chart
- Battery and grid overview
- Historical data
- Developed according to EU and Siemens cybersecurity guidelines
- Data storage exclusively on servers in Germany
- Every new function is comprehensively and independently tested